Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_EL9QHKG10GPM20IJGE61AK10S6
Z7_P86CH0O0I0RF10IB06HRVQ0087
Z7_EL9QHKG10GPM20IJGE61AK10S5
Home
>
Service & Installation
>
Welding, Brazing & Cutting Tools
Preferred alloy for general copper-copper brazing Joins CU to CU (phosphorus serves as flux) Joins CU to Brass (flux is recommended) Highest joint ductility of entire Sil-Fos family Allows for fillet build up Slow flow-penetrates well into long shear depths Made in USA 
Brazing copper to copper/copper to copper alloys Do not use on ferrous or nickel base materials Joins CU to CU (phosphorus serves as flux) Joins CU to Brass (flux is recommended) Melts & flows at tempsvery close to 15% Ag Slow flow Made in USA 
Preferred alloy for general copper-copper brazing Can be used to join brass with appropriate flux Joins CU to CU (phosphorus serves as flux) Joins CU to Brass (flux is recommended) Low cost alt. to silver content Ag-Cu-P alloys Medium flow Made in USA 
Brazing copper to copper/copper to copper alloys Used economical or free flowing alloy is required Joins CU to CU (phosphorus serves as flux) Joins CU to Brass (flux recommended) Very economical alloy Fast Flow Made in USA 
Primarily joins nickel and iron base alloys Can Use to join other non-ferrous metals Nickel content enhances wetting Very fluid at brazing temperature Blocks interface corrosion on stainless steel Cadmium free Made in USA 
Primarily joins nickel and iron base alloys Coated with general purpose Handy Flux Improved joint strength due to less flux inclusion Minimizes post-braze cleaning Reduces brazing cycle times Made in USA 
Handy Flux is a water based active flux Used in open air brazing for ferrous & non-ferrous Good part adhesion All-purpose flux, 7 oz. w/brush Low temperature silver alloys (1100F-1600F) Made in USA 
Tin-silver for Cu-Cu tubing & water lines Lead free High strength soft solder Free flowing Good color match to stainless steel Made in USA 
Tin-silver for Cu-Cu tubing & water lines Used for applications where a slightly more sluggish flow is require Lead free High strength soft solder Can bridge large gaps Good color match to stainless steel Made in USA 
"The safe water solder" Non-toxic solder, free of both lead and antimony Premium solder for potable water Excellent flow and control High strength Made in USA 
The Insurance Pad is the ultimate heat shield Wet or dry - protection in excess of 2500°F Higher temperature protection for prolonged use 100% Fiberous Carbon Pad Repeated use increases its heat resistance 
The Insurance Pad is the ultimate heat shield Wet or dry - protection in excess of 2500°F Higher temperature protection for prolonged use 100% Fiberous Carbon Pad Repeated use increases its heat resistance
Type
Liquidus
Solidus
AWS
Length (in.)
Description
Price
Quantity
Sil-Fos Brazing Alloys
Sil-Fos® 15
Sil-Fos Brazing Alloys
Sil-Fos® 6m
Sil-Fos Brazing Alloys
Sil-Fos® 5
Sil-Fos Brazing Alloys
Fos-Flo® 7
High Silver Brazing Alloys
Braze® 505 1oz
High Silver Brazing Alloys
Braze® 505 F/C Flux Coated Rod
Brazing & Solder Fluxes
Handyflux 7oz. Jar w/Brush Cap
Brazing & Solder Fluxes
Clean-N-Brite 1lb Spool
Brazing & Solder Fluxes
Clean-N-Brite 6 1 Lb Spool
Brazing & Solder Fluxes
Clean-N-Brite NoLead 1lb Spool
Solder/Braze Heat Shield
9 x 12 x 1/2 Exceeds 2500°F
Solder/Braze Heat Shield
9 x 12 Up To 2500°F
