Protect your most expensive appliance from all surges, both internally generated and externally generated.

Replace Variable Speed GE 2.0, 2.3, 2.5, 3.0, US Motors, Emerson with Azure constant torque ECM and save TIME, MONEY, and HEADACHES

The hand held programmer allows blower motor speeds to be expanded from a typical 5 to up to 80. Easily dial in the CFM with this tool, MARS No. 08502. For use with MARS Azure direct drive blower motors.

Azure motors 10858 & 10859 replace any X13 style constant torque OEM ECM motor from any equipment manufacturer. No programming tools required. Motor goes from truck stock directly into the equipment. Motor self programs to each and every system in about 90 seconds.

Quickly cleans condensers without having to remove the hail guard or fan assembly.

Comparison of the MARS 780 DP contactor and a competitive knock off. DP contactors are technical devices with important differences not always readily seen. Do not choose any DP contactor; choose the MARS 780. There is no substitute.

This Azure ECM from MARS easily replaces standard PSC motor technology (115V speed taps). MARS No. 10865 (1/3HP - 1/2HP) and MARS No. 10866 (3/4HP - 1HP).

MARS commercial motors are built to deliver robust power output.

Overview of 3 key features of Azure 3.3 ECM for walk-in coolers.

60 second overview of the amazing high performance condensate pump from MARS.

This is the MARS offering of HVAC surge protection. Recommended for use on all furnaces, mini-splits, heat pumps, and AC condensers. A whole house surge protector DOES NOT eliminate the need for local surge protection due to the creation of voltage spikes on the 'safe side' of the whole house device.

Couple of ways to check your capacitor.

Is the run capacitor important to your PSC motor?

Tips on checking the operation of a DP contactor

Azure ECM watt motor (MARS 10891) is IP67 and submersible. It is the only IP67 commercial refrigeration motor capable of being custom programmed with a smart device and the optional wireless module.

Comparison of power consumption and amp draw of an ECM motor and a PSC motor.

Brief explanation of the programming procedure for the Azure 10891 watt motor for commercial refrigeration.

This video shows how to install the Azure® Digi-Motor® when replacing a standard PSC blower motor.

This is an overview the Azure® 10870 ECM for condenser fan applications.

This video shows how to install the Azure Digi-Motor when replacing a standard PSC blower motor.

Brief installation video demonstrating how easy this motor is to install. You do have to open all registers and returns as well as install a new air filter prior to auto sizing the motor.

Brief overview of the wireless programming kit for MARS Azure commercial refrigeration motors.

Brief overview of the operation of an Azure 3.3 motor (MARS 10852) installed with thermistors as a 2 speed motor for enhanced energy savings. Motor runs at 1550 RPM during the refrigeration cycle and 1000 RPM during the off cycle. A lower off cycle speed can be set using the wireless programming module and a smart phone/tablet.

Brief overview of the programming and set up of the 2-speed Azure 3.3 motor for commercial refrigeration walk-in coolers.

This is an overview of key features critical to the high performance and reliability of the MARS condensate pump for professional HVAC/R contractors.

This demonstration shows the performance of the Azure 3.3 commercial refrigeration motor for evaporator fan applications.

This is a depiction of the ability of the Azure watt motor (MARS 10890) to resist water damage during a washdown.

Quick overview of Turbo.